Long Wall Company was created in 2025 to accelerate missile defense technology for the U.S. and our allies. Building on the RS1 and GS0 launch systems, Long Wall develops containerized, mass-producible missile defense systems and offers rapid, low-cost flight testing. We believe that the future of global security and stability require defensive technology that is lower cost, higher performing, better tested, and more broadly distributed than is possible today. Join us.

What we look for

Mission-Driven Problem Solvers. The aerospace frontier demands ingenuity. We want engineers who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission.

Total Ownership. We seek engineers who take full responsibility for delivering flight-ready work while recognizing that no one succeeds alone. The best engineers make their teammates better, knowing that complementary skills create force multiplication and drive mission success.

Description

We are looking for an experienced avionics technician (S4 or S5) who is excited about manufacturing development and production hardware for launch vehicles and defense systems. We seek team members who can think critically to improve hardware designs and manufacturing processes, and deliver high quality hardware to our programs. Avionics technicians build and test components and electrical assemblies our launch vehicles and defense systems. Avionics technicians are responsible for a broad range of responsibilities including PCB assembly and rework, electro-mechanical assemblies, sensors/transducers, cable and wire harnessing, final integration, operating thermal chambers, functional testing, and perform software driven tests.

Description
We are looking for an experienced avionics technician (S4 or S5) who is excited about manufacturing development and production hardware for launch vehicles and defense systems. We seek team members who can think critically to improve hardware designs and manufacturing processes, and deliver high quality hardware to our programs. Avionics technicians build and test components and electrical assemblies our launch vehicles and defense systems. Avionics technicians are responsible for a broad range of responsibilities including PCB assembly and rework, electro-mechanical assemblies, sensors/transducers, cable and wire harnessing, final integration, operating thermal chambers, functional testing, and perform software driven tests.

This is the lowest to highest compensation range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs.

In addition to base pay and equity, we offer:

· Heavily employer-subsidized medical, dental, and vision insurance plans

· Long Wall paid life insurance and LTD coverage

· 4% 401k match

· Student loan repayment assistance program

· Paid parental leave

· Family planning assistance program

· Long Wall paid financial wellness program

· Paid time off for non-exempt employees and flexible vacation policy for exempt employees

Responsibilities:

Assemble PCBs into product chassis and support final vehicle integration by installing electrical sub-assemblies and routing cables and harnesses

Assemble electro-mechanical components along with the building of circuit boards and small electrical assemblies

Fabricate high quality, high reliability cable and wire harnesses

Operate complex automated equipment, including routine inspection, maintenance, and troubleshooting

Document anomalies and non-conformities and associated rework to quickly return non-conforming product back into normal workflow

Perform functional testing of built hardware, including setups, instrumentation, test execution, create/upload reports, and teardown

Ensure lab equipment, tooling and consumables available and maintained to a high standard

Work closely with manufacturing and test engineers to provide input and develop assembly processes and test procedures

Assist with the development of production processes for first time production

Instruct and mentor junior avionics technicians

Basic Minimum Qualifications:

High School Diploma/GED or Equivalent

Minimum 5+ years of relevant hands-on technician work experience in aerospace, aviation, military, telecommunications or similar industries. Including demonstrable working knowledge of, but not limited to:

o PCB, cable harness fabrication, electro-mechanical, mechanical, integration assemblies and prototype development

Preferred Skills and Other Experience:

Ability to perform assembly operations including bending, crimping, grasping, pulling, reflowing, sitting, soldering, standing, stooping, stretching, stripping, and torquing

Proficient usage of a PC; experience with Microsoft Windows, Microsoft Office Suite (Excel, Outlook, Power Point, Word), shop floor management software (ERP) and related programs

Strong written and verbal communication, and organizational skills, and high level of attention to detail

Ability to read/interpret and work from controlled technical documentation and processes such as engineering drawings, layout drawings, mechanical drawings, assembly procedures, manufacturing instructions, schematics, and parts lists

Skills in operating and manipulating automated machinery and various mechanical and electronic hand and power tools requiring manual dexterity with minimal instruction

Strong emphasis on safety, cleanliness, adherence to corporate policies and standards, a great attitude, and the ability to effectively work with a team

Ability to rapidly change roles/responsibilities while working in a high-paced, challenging flight production clean room environment

1+ years of experience working at a rocket launch facility and supporting launch campaigns

Associate Degree in electrical discipline.

Manufacture and soldering of electronic components to NASA workmanship standards using IPC-J-STD-001 and/or IPC-A-610 standards

Manufacture electrical cable and harnesses to IPC-A-620 standard

Current or past certification for NASA-STD-8739.4, NASA-STD-8739.6, IPC-A-610, IPC-A-620, IPC-J-STD-001 or equivalent

Knowledge of ANSI S20.20 Electrostatic Discharge (ESD) standard and 5S methodologies

Additional Requirements:

Physical effort including carrying, lifting, and pushing moderately heavy materials or equipment (15 to 40 lbs.)

Ability to climb up and down ladders to work at elevated

Work occasionally performed in an environment requiring exposure to fumes, odors, and noise

Must be willing to work 50+ hours a week (overtime) including weekends when necessary to support launch and critical project timelines, flexibility required

Must be willing to travel to other Long Wall sites or customer facilities as necessary

ITAR Requirement

This position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position.

Equal Opportunity Employer

We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Sr. Avionics Development Technician